Servicing Maryland, New Jersey, Virginia, Delaware, Connecticut, Lower Massachusetts and Eastern Pennsylvania

Industrial Doors | Fabric High Speed Roll-Up Doors

Hörmann High Performance Doors are committed to providing the best quality, value, and selection of German engineered and American made products. Whether industrial doors, or commercial doors, we have the high speed roll up door you’re looking for.  Their product line gives you the ability to accommodate any roll up door application with the right product from one high speed door manufacturer.

BROCHURE

Hormann-Flexon Speed-Master 1600 L Eco

BUILT-IN LIGHT GRID AND REMOVABLE COVERS
The Speed-Master® 1600 L Eco is equipped with heavy duty 12 gauge hot-dipped galvanized steel guide tracks and a standard built in light grid. The front covers conveniently open for ease in re-setting the door when required. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment at the doorway, as compared to other doors that use only photocells. The low-profile track dimensions of 7-1/4″ wide x 4-1/2″ projection enable the Eco to fit into areas with limited clearance.

SECTIONAL DESIGN WITH 58 OZ. PANEL MATERIAL
The Eco’s panel is constructed of 58 oz./sq. yd., anti-static, puncture resistant, nylon-reinforced PVC material, one full-width vision area made of clear PVC is standard, and heavy duty interlocking aluminum hinge profiles located above and below the vision area to provide panel stability. The sectional panel design allows for easy replacement of materials if needed after a hit. A variety of panel colors are available to accommodate any color scheme: Pure Orange RAL 2004, Gentian Blue RAL 5010, Zinc Yellow RAL 1018, Carmine Red RAL 3002, Agate Gray RAL 7038, Pure White RAL 9010.

OPTIONAL UPS EMERGENCY BATTERY PACK
The Speed-Master® 1600 L Eco is only available with the HFCB 1-phase control box. A special UPS emergency battery pack is optional and provides peace-of-mind in case of a power failure. If power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area. This low maintenance design is free of springs, counterbalance systems and other high maintenance parts that are typically required for emergency opening. When the battery is low, an alarm sounds to signal time for replacement. Replacing the battery is a simple process that takes just a few minutes.

Application / Size Range

Colors

  • Orange
  • Blue
  • Yellow
  • Red
  • Gray
  • White

Guide Tracks

  • Standard: Heavy-duty, 12 gauge, galvanized steel with removable front covers. Guide tracks are 7-1/4″ wide x 4-1/2″ deep with an 8’0″ high light grid built in.
  • Optional: Stainless steel.

Direct-Drive Motor

  • Compact, self-monitoring direct-drive motor has a patented built-in safety brake and is maintenance free.

Application / Size Range

  • Interior or exterior applications.
  • Up to 12’0″ wide x 12’0″ high.

Operating Speed

  • Up to 60″ per second up and 30″ per second down.

Panel

  • Patented, sectional design constructed of 58 oz./sq. yd., reinforced, puncture resistant PVC panels connected with heavy duty aluminum hinge profiles.

Vision

  • Full-width vision area made of high quality PVC is standard. Consult factory for additional vision areas.

Control Box

  • Standard: HFCB 1-phase, hardwired. 230 v / 1-phase / 60 Hz / 3-phase output power requirement.

Safety Devices

  • Standard: 8’0″ high light grid built into guide tracks.

Custom Panel Prints

  • Make an impression with our customized panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.

Hormann-Flexon Speed-Master® 1600 L

BUILT-IN LIGHT GRID
Standard on the Speed-Master® 1600 L is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment at the doorway, as compared to other doors that use only photocells. Full perimeter draft seals provide dust and odor containment, as well as general environmental control.

GUIDE TRACKS WITH REMOVABLE COVERS
The Speed-Master® 1600 L has guide tracks with removable covers. Heavy duty 12 gauge hot-dipped galvanized steel tracks are a two-piece design, and the front covers conveniently open for ease in re-setting the door when required. The low-profile tracks dimensions of 7-1/4″ wide x 4-1/2″ projection enable the Speed-Master® 1600 L to fit into areas with limited clearances.

SINGLE PHASE CONNECTION / 3-PHASE DRIVE
The enhanced Speed-Master® 1600 L now accommodates the standard power sources readily available in most facilities. For doors up to 10’0″ wide x 10’0″ high, the HFCB control box is hardwired and standard with a 230 v / 1-phase / 60 Hz / 3-phase output power requirement. For doors over 10’0″ wide x 10’0″ high, the 230 v or 460 v / 3-phase / 60 Hz UL listed control box is standard. Optional for all sizes are both the HFC1 3-phase, hardwired control box and the proven and tested Smart Start™ HFC1 3-phase control box when UL approval is required.

OPTIONAL UPS EMERGENCY BATTERY PACK
Available with doors equipped with our 230 v / 1-phase HFCB control box. With this option, if power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area.

Application / Size Range

Application / Size

  • Range Exterior or Interior applications.
  • Up to 14’0″ wide x 16’0″ high.

Operating Speed

  • Up to 60″ per second up and 30″ per second down.

Panel

  • Patented, sectional panel design, made of ultra tough, reinforced, puncture resistant 1/8″ thick Bulldog XT material, 90 oz. / sq. yd. Panels are connected with heavy duty aluminum hinge profiles.

Vision

  • Two, full-width vision areas made of high quality PVC are standard. Consult factory for additional vision areas.

Colors

  • Black
  • Blue
  • Orange
  • Grey

Guide Tracks

  • Standard: Heavy-duty, 12 gauge, galvanized steel with removable front covers. Guide tracks are 7-1/4″ wide x 4-1/2″ deep with an 8’0″ high light grid built in.
  • Optional: Stainless steel (see Food Processing Compliant Model).

Direct-Drive Motor

  • Compact, self-monitoring direct-drive motor has a patented built-in safety brake and is maintenance free.

Control Box

  • Standard: For doors up to 10’0″ wide x 10’0″ high, HFCB 1-phase, hardwired.
  • For doors over 10’0″ wide x 10’0″ high, 230 v or 460 v / 3-phase / 60 Hz UL listed control box.

Optional for all sizes

  • HFC1 3-phase, hardwired or Smart Start™ HFC1 3-phase.
  • HFC1 3-phase, hardwired stainless steel (see Food Processing Compliant Model).

Safety Devices

Standard: 8’0″ high light grid built into guide tracks.

Food Processing Compliant Model

Stainless steel options are available. Select from the following depending on the application requirements: Roll-tube / hollow shaft, motor cover, guide tracks, stainless steel HFC1 3-phase hardwired control box. Panel constructed of 1/8″ thick, 90 oz. / sq. yd. USDA compliant Bulldog XT material and two full-width vision areas made of high quality USDA compliant PVC.

Custom Panel Prints

Make an impression with our customized panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.

BROCHURE

Hormann-Flexon Speed-Master® 2600 L

BUILT-IN LIGHT GRID AND HINGED GUIDE TRACKS
Standard on the Speed-Master® 2600 L is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells. The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime. Full perimeter draft seals provide dust and odor containment as well as general environmental control.

IDEAL FOR DEMANDING APPLICATIONS
Demanding industries such as manufacturing, paper mills, steel plants, airports, distribution and transit, that have high cycle door requirements, will benefit from the simple and reliable design of the Speed-Master® 2600 L. Design advantages such as zero moving parts within the guide tracks and direct-drive motor, support minimized maintenance for the walk-away dependability busy operations desire.

Our exclusive 5 & 2 Warranty is our promise to you that you can count on our doors to perform according to your standards for many years to come.

TWO CONTROL BOX CHOICES
A hardwired UL / CUL control box with a 230 or 460 v / 3-phase / 60 Hz power requirement is standard equipment on the 2600 L. Optional is our proven and tested Smart Start™ HFC1 3-phase plug and play control box with is also UL / CUL approved.

Application/Size Range

Application / Size

  • Exterior or Interior applications.
  • Up to 20’0″ wide x 24’0″ high.

Operating Speed

  • Up to 36″ per second up and 30″ per second down.

Panel

  • Patented, sectional panel design, made of ultra tough, reinforced, puncture resistant 1/8″ thick Bulldog XT material, 90 oz. / sq. yd. Panels are connected with heavy duty aluminum hinge profiles.

Colors

  • Black
  • Blue
  • Orange
  • Grey

Vision

  • Two, full-width vision areas made of high quality PVC are standard. Consult factory for additional vision areas.

Guide Tracks

  • Heavy-duty galvanized steel.

Direct-Drive Motor

  • Compact, self-monitoring direct-drive motor has a patented built-in catch system and is maintenance free.

Control Box

  • Standard: Hardwired UL / CUL with 230 or 460 v / 3-phase / 60 Hz power requirement.
  • Optional: Unique Smart Start™ HFC1.

Safety Devices

Standard: 8’0″ high light grid built into the guide tracks.

Custom Panel Prints

Make an impression with our custom panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.

Hormann-Flexon Speed Master® 4600

BULLDOG-TOUGH PANEL

Recommended for exterior or interior door openings up to 33’0″ wide x 30’0″ high or 690 square feet, the Speed-Master® 4600 is constructed of patented, interlocking aluminum hinges which act as integral windbars, creating a sectional panel design that provides panel stability and increased wind resistance. Sliding the panels apart without removing the entire door or roll assembly allows for inexpensive replacement, and a full-width vision area provides unobstructed viewing. Since the Speed-Master® bottom bar consists of few parts, does not support a tensioning system, and requires less repair time, it can be replaced at a lower cost than comparable products.

 

UNIQUE ENERGY CHAIN

The Model 4600 has low profile heavy duty steel guide tracks that contain a sophisticated energy chain which allows for automatic reversal of the panel and eliminates the use of a coil cord, for a streamline installation. Full perimeter draft seals provide dust and odor containment as well as general environmental control.

SPECIAL 5 & 2 WARRANTY

Demanding industries such as manufacturing, mass transit, warehouses and waste management facilities will benefit from the simple and reliable design of the Speed-Master® 4600. Design advantages such as zero moving parts within the guide tracks and direct-drive motor, support minimized maintenance for the walk-away dependability busy operations desire.

Our exclusive 5 & 2 Warranty is our promise to you that you can count on our doors to perform according to your standards for many years to come.

Application / Size Range

Application / Size

  • Exterior or Interior applications.
  • Up to 33’0″ wide x 30’0″ high or 690 sq. ft.

Operating Speed

  • Up to 24″ per second up and 24″ per second down.

Panel

Patented, sectional panel design, made of ultra tough, reinforced, puncture resistant 1/8″ thick Bulldog XT material, 90 oz. / sq. yd. Panels are connected with heavy duty aluminum hinge profiles.

Vision

Two, full-width vision areas made of high quality PVC are standard. Consult factory for additional vision areas.

Direct-Drive Motor

Compact, self-monitoring direct-drive motor has a patented built-in catch system and is maintenance free.

Control Box

Standard: Hardwired with 230 or 460 v / 3-phase / 60 Hz power requirement.

Safety Devices

Standard: Lightweight energy chain.

Custom Panel Prints

Make an impression with our customized panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.

Colors

  • Black
  • Blue
  • Orange
  • Grey
  • Guide Tracks
  • Hinged, heavy-duty steel.