Servicing Maryland, New Jersey, Virginia, Delaware, Connecticut, Lower Massachusetts and Eastern Pennsylvania

DGBM Serco Dock-Guard Safety Gate


In a busy loading dock, an open, unprotected dock opening is an accident waiting to happen.

Increased Safety

The Serco Dock GuardTM Safety Gate, in a closed position, protects personnel, goods and equipment from inadvertently falling off the loading dock through an open dock door.

Save on Maintenance Costs

Overhead door damage is often the highest maintenance expense at busy distribution docks. The barrier protects the dock doors, door tracks and hardware from damage due to accidental forklift impact. There’s no need for expensive concrete-filled pipe bollards on the dock floor.

In a raised position, the Safety Gate allows free traffic movement from the dock to the truck bed. The Dock Guard is tested to stop a 15,000-lb. load travelling at 4 mph without any damage to the pivoting mechanism or support structure. The barrier arm itself can easily be replaced if damage occurs.



Available in 3’, 6’ or full door heights, this heavy duty option protects overhead door tracks from even the most abusive impacts keeping them operating smooth and efficiently for years.

APS Sentry Rail

Design Highlights

  • Standard posts available in double rail (42″) and single rail (18″); custom posts upon request
  • Optional removable/swing gate available
  • Add rails to existing system as your needs grow
  • Easily installed and/or relocated to fit your changing application needs
  • Can withstand a 10,000 lb. load at 4 mph

APS Trak Sentry

Design Highlights

  • Heavy-duty steel construction
  • 4′ standard height for maximized protection
  • Includes 6 heavy-duty anchors for floor installation (wall anchors by others)

APS Z-Track Guard

Design Highlights

  • A cost effective way to protect door tracks
  • Keeps floor space unobstructed around the door opening
  • Does not interfere with security wiring around the door opening
  • Two sizes: 30″ high – Est. weight (pair): 42 lbs.; 48″ high – Est. weight (pair): 80 lbs.

Heavy Duty Fork Sentry


A heavy duty barrier to protect machinery and personnel from lift truck traffic. Highly visible safety yellow and rugged construction barrier provides safety to company assets.

  • heavy-duty, gusseted, 8″ high construction
  • high visibility safety yellow
  • Provides safety to machinery, personnel and company assets
  • Protects from lift truck traffic and forks
  • 18″ and 60″ length standard sizes
  • other sizes available upon request

Illinois Engineered Products Security Gate

Pair Folding Security Gates

Pair Folding Security Gates secure dock and receiving doors, doorways, garage and service doors, hallways and entranceways without sacrificing visibility or air circulation. For narrow openings, use Single Folding Gates.

The Only Folding Security Gates Made With Heavy-Duty Galvanized Steel.

They withstand brutal 4-season conditions like rain and snow. Our Gates stand up to harsh industrial chemicals and cleaners too.

The Strongest Folding Security Gates on the Market.

Our Security Gates are the only gates made with solid galvanized steel 5/8” self-securing drop pins designed to fit directly into floor holes. They provide maximum strength and maximum security. You cannot buy a stronger gate!

They’re Riveted Back to Back with Aircraft Quality Aluminum Rivets.

They’ll hold up to more stress, are rust resistant, they won’t crack and the webbing won’t separate. Our Folding Security Gates pivot 180 Degrees on their Mountings — so they pivot completely out of the way, leaving the opening completely clear of obstructions.


Guard Rail

  • Safeguard your workplace from injuries and accidents caused by moving vehicles.
  • Designed to absorb the impact of a forklift, sweeper, other in-plant vehicles.
  • Available in stock single or double rail heights that can be customized to fit any application.
  • Attractive, highly visible OSHA approved safety yellow finish.
  • Heavy duty construction for superior strength and long term reliability.
  • Modular construction with standard components that are easily adaptable to most applications.
  • Easy to install – shipped with all necessary components and hardware. Easy to expand or relocate.

Rack Sentry - Cut Out Option

The Rack Sentry Cutout product features a cutaway section on the return arms to allow it to be placed on racking with beams located down to 5″ from the floor. This option allows the use of Rack Sentry® on virtually any upright.

Previously Rack Sentry® could only be used on rack uprights without intersecting beams. This new option gives users the ability to use Rack Sentry practically anywhere needed. The location of the cutout is offset so that it can be placed either 5″ or 7″ from the floor, depending on which end is placed down. This allows more flexibility in placement while keeping protection where you need it.

We know of no other protective product in the world that offers protection below, above, and at the low beam placement.


Rack Sentry Corner Design

New Rack Sentry® – Corner: For End of Rack Installations

The Rack Sentry® – Corner product offers 270 degrees of protection. It is designed to install on the end of the rack installation and can protect both the front of the rack and the vulnerable end. It is designed to visually complement our existing line of Rack Sentry® products: 18″ (46cm) high, installed with 2 included hook & loop straps. Rack Sentry® Corner ideally fits on 3″ (75mm) wide rack uprights, but with this new design it is not impossible to apply this to different width uprights.

Standard Rack Sentry Protection

Rack Sentry® rack protectors attach to your rack uprights, protecting them from the abuse from collisions with your forklifts. Constructed of a flexible EVA material, Rack Sentry gives your racks a highly visible layer of protection that’s easily installed without tools. Rack Sentry is available in a number of sizes to fit most uprights. Additionally, there are models available for low beam installations and for end racks.

Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing, returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product.

Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor.

Rack Sentry® exceeds the European FEM standard of 400 N.m protection recommended for rack uprights.

Standard Rack Sentry Protection